JBA - Bilstein 4" WK/XK Lift kit

$1,250.00
OR

Quick Overview

JBA - Bilstein 4" WK/XK Lift kit, this is a basic kit, depending on how you use the Jeep you may need to add more to this kit to work on your vehicle.

Details

JBA Upper A-arms for lifted WK/XK, JBA-RCS4-WK Rear Coil Springs, 24-225793 Bilstein Ride Height Adjustable Shock Absorbers, OME-2991 Front Springs, BILSTEIN - Heavy Duty 4" Lift Rear Shocks

Get more info about the JBA-Bilstein lift

Additional Information

Manufacturer No
Variant 1

Customer Reviews

Caution Review by jacob
When using this kit the geometry of the wk restricts how far you can lift the front without issues arising from the cv axle. When installing this set strut to lowest setting to achieve 4" setting higher with the ome hd coils can over stress the joint. I have had this set up on my wk for over a year now and had to bring the height down because of axle issues. (Posted on 4/17/2017)
Need the right strut compressor Review by James
If you plan on DIY than you need to make sure you have the right type of strut/spring compressors. After pulling my front end apart and putting the OME HD springs on the Bilstein struts set at 2" lift I quickly found out that my spring compressors were too large to be removed while the springs were compressed enough for me to put the top strut plate on. Essentially I could not finish the install with my current spring compressors and ended up having to take it to a shop. Just FYI, less expensive Spring Compressors won't work on this kit, if you have high quality strut compressors like a Branick 7600 you should be okay to do this yourself. (Posted on 11/10/2015)

Write Your Own Review

Only registered users can write reviews. Please, log in or register

You may also be interested in the following product(s)

Rear Bump Stop 4"

Rear Bump Stop 4"

Regular Price: $30.81

Special Price $28.62

EGR Module

EGR Module

$280.95
JBA 4" Rear WK/XK Sway Bar Links

JBA 4" Rear WK/XK Sway Bar Links

$195.95
WK/XK Wheel Spacer Kit

WK/XK Wheel Spacer Kit

$89.95